This can be installed to carding machine from different brands, such as those listed below:

• RIETER: C1/2 ,C1/3, C4
• LMW: C1/2, C1/3
• CROSROL: MK-3, MK-4, MK-5
• MAZOLI: C40,C41, C300
• TOYODA: CN , CE , CK-7
• HOWA: CMK-3, CMTK-3, CM-80
• CHINESE: FA-201, FA-231, FA-212A, A-186F

  Lowers the amount of unevenly weighted slivers produced because of the issues with the Chute Feed.The 6 yard sliver weight CV% can also be controlled to be under 1%.
  When the machine is operating over the time pre-set under the controls, an alarm will go off and the operation will stop to avoid production of low quality products.
  The Roller Gauge can be adjusted according to the length of the fiber and is suitable for all types of raw materials. Because of drafting, the amount of production increased approximately 15% compared to before retrofitting. This device can be treated as the Pre-Draw System on the carding machine and it enables the sliver to be more stable during cotton drawing